To clean and descale a coffee machine, wash its removable parts, remove coffee residue with a suitable cleaner, then run a compatible descaler through it according to the manual. Cleaning removes oils and grounds; descaling removes mineral deposits. Rinse thoroughly after each process before you brew again.
What's the difference between cleaning and descaling?
Coffee leaves oils and fine particles on filters, baskets, brew groups and dispensing outlets. These residues can make your fresh coffee taste stale or bitter, even when you use good beans and clean water.
Descaling removes deposits inside your machine's water circuit, including the heater and internal tubing. Hard water contains dissolved calcium and magnesium, and heating it can leave calcium carbonate deposits, as explained by the U.S. Geological Survey.
Cleaner and descaler aren't interchangeable. A coffee-oil cleaner won't necessarily remove mineral scale, while descaler won't thoroughly degrease a dirty filter basket. If your machine has separate cleaning and descaling alerts, you need to follow both maintenance routines.
What should you use to clean a coffee machine?
Check the maintenance section of your model's manual before choosing a product. Machines use different internal metals, seals, water filters and automatic cleaning programs, so advice for one model may not suit yours.
- Use mild dishwashing liquid on removable parts only if your manual allows it.
- Choose a coffee-machine cleaning tablet or powder specified for your machine's cleaning cycle or brewing components.
- Use a descaler approved for your machine, at the dilution stated on its label and in the manual.
- Keep a soft cloth, a nonabrasive brush and a container large enough to collect the discharged solution nearby.
Don't use vinegar unless permitted by the manufacturer. It isn't suitable for every machine and can leave a lingering smell. Don't use homemade citric acid mixtures if your manufacturer specifies a different formulation or concentration.
Never mix maintenance chemicals or add bleach, drain cleaner or household limescale remover to the water tank. Avoid abrasive pads on plastic parts and coated surfaces.
How do you clean coffee residue from your machine?
Switch off and unplug your machine before removing parts for manual cleaning, and let hot components cool. Never immerse the machine body or electrical base in water.
Empty the grounds container, capsule bin and drip tray. Wash removable parts with warm water and mild dishwashing liquid where the manual permits, rinse thoroughly and let them dry. Use a dishwasher only for parts explicitly labelled dishwasher-safe.
If you have a filter coffee maker, clean the filter basket, lid and carafe, paying attention to seams and the pouring spout. Remove oily deposits from reusable mesh filters with a suitable cleaner rather than scraping them with a sharp tool.
For a capsule machine, clean the capsule holder and accessible outlet as the manual directs. Don't poke into piercing needles or dismantle the brewing head without instructions for your model.
If you have an espresso machine, brush loose grounds from the group head and clean the basket and portafilter. Backflush only if your machine supports it. This process uses a blind basket to redirect water through a compatible machine's brew valve. Don't backflush a machine that lacks the appropriate valve.
If your automatic machine has a removable brew group, rinse it as directed, often with water only. Don't add detergent or lubricant unless the manual specifies it. After preparing milk, wipe and purge the steam wand as instructed. Clean automatic milk circuits with their designated program and product.
How do you descale a coffee machine step by step?
Complete routine cleaning first so you aren't running descaler through dirty removable parts. Keep coffee, capsules and milk out of your machine during descaling.
- Prepare the machine. Empty the drip tray and tank. Remove the tank's water-filter cartridge if the manual requires it, and place a suitable container beneath the outlets.
- Mix the approved descaler with the specified amount of water. Don't increase the concentration to treat heavy buildup.
- Start the dedicated descaling program. If your machine has no program, follow the manual's dispensing and pausing sequence rather than choosing your own soaking time.
- Let the cycle finish. Some machines send solution through both the coffee outlet and hot-water wand, so follow each prompt.
- Empty and rinse the tank, refill it with fresh drinking water, and complete every required rinse cycle. Refit or replace the water filter as instructed.
Don't interrupt the descaling cycle unless the instructions tell you to or your machine develops a fault. Keep the collection container from overflowing, and avoid contact with the hot water discharged by the machine.
Don't brew coffee until you've completed all the specified rinse cycles. If a chemical smell remains, check that you used the correct product and dilution, then follow the manufacturer's advice on additional rinsing. Don't taste the discharged solution to check it.
How often should you clean and descale your coffee machine?
Remove used grounds and capsules, empty the drip tray and rinse washable parts that touch coffee after use or at the end of each day you brew. Clean parts that touch milk after each use according to your machine's instructions.
Use a coffee-oil cleaner at the intervals specified in your manual or when the cleaning alert appears. You'll need to clean a heavily used machine more often than one you use for a single daily cup.
Descale at the manufacturer's recommended interval or when the descaling alert appears. Water hardness and the volume of water heated affect how quickly scale builds up. If your machine has a hardness setting, use the recommended test strip or your water supplier's information to set it correctly.
Don't assume filtered water eliminates the need for descaling. Some filters reduce hardness, while others mainly improve taste and odour. Check your cartridge's specifications and follow its replacement schedule.
What should you do if cleaning doesn't fix the problem?
If your coffee still tastes stale, check the basket, outlet, carafe lid and accessible seals for trapped oils or grounds. Also check your beans and water before repeating a chemical cleaning cycle.
If the descaling warning stays on, confirm that you've completed the full program, including rinsing and any required reset. Repeating descaling without checking the instructions may waste product without clearing the alert.
If the water flows slowly, check for a blocked filter or an overly fine espresso grind; a mechanical fault can also cause slow flow. Stop using your machine and contact a qualified service technician if it leaks from the housing, repeatedly overheats, trips your circuit breaker or still fails to pump after you've completed the recommended checks.